Home Contact Legal
Micronetics
RF Components: Surface Mount Noise Sources
RF Components
Attenuators
Equalizers
Detectors/Limiters
Ferrites
High Power Limiters
High Power Switches
Mixer Products
Noise Source Products
NS346 Calibrated Noise Sources
Broadband Microwave Coaxial Noise Sources
Surface Mount Noise Sources
High power broadband noise sources
Fullband Microwave Noise Sources
DML (Densitron Microwave) Legacy Noise Sources
DIP packaged noise sources
Noise Diodes
Phase Shifters
Power Amplifiers
Low Noise Amplifiers
Solid State Switches
Switch Filter Banks
VCOs
Multifunction Modules
Test Equipment
RFID Solutions

RF Components: Surface Mount Noise Sources

½" Surface Mount Series
SMT Noise ModelFrequency
SMN7103100 Hz to 500 kHz
SMN7105100 kHz to 3 MHz
SMN7106200 kHz - 12 MHz
SMN710850 kHz to 100 MHz
SMN71095 MHz to 500 MHz
SMT The SMN71XX noise surface mount modules are designed for a wide range of applications. It features high noise output amplitude for uses ranging from encryption to jamming. All biasing and amplification circuitry is built-in making it easy to design into your system. It features a built-in voltage regulator for highly stable output even if your DC supply lines are not.

SMT Noise Sources
The SMN3110 100 kHz to 3.0 GHz low bias voltage noise module is ideal for applications for systems that only have low DC bias voltages available; featuring a built-in regulator to handle changes in the bias supply voltage without having an effect on the noise amplitude output.

Our SMN7114 100 MHz to 3.0 GHz amplified microwave noise source features high ENR output for uses from built-in-test to jamming. All biasing circuitry is built-in making it easy to design into your system.

The NC500SM Series 200 kHz to 3.5 GHz Surface Mount Noise Source.

Our SMDM70 Dithering Modules 200 kHz - 2 MHz Contains all circuitry for: Noise Biasing, Amplification, Low Pass Filtering and Combining with Analog Signal

Hermetic Surface Mount Noise Source
SMT The NFP1003 100 MHz to 3 GHz noise source features high ENR output allows for significant circuit loss such as that caused by power splitters, switches and directional couplers, and still have enough noise signal without additional amplification.

The World's Smallest Noise Source
SMT The SMN3018 200 MHz to 6.0 GHz noise module is a mere 0.150" x 0.220" surface mount device that has all the biasing circuitry built-in so all that is required is a DC source and ground.
Choose from Micronetics proven Noise Source designs in-stock or ready-to-build models, or connect with our engineers to have a noise product designed to your specifications. Enter your desired specifications into the simple-search below.

Smart Search
Device Type:
Frequency Range: Between and
Form Factor:
Search for a product by specification Or have us contact you to talk about your project.
SUBMIT!
Product Listing
Model Low Freq High Freq Noise
Output (ENR)		 Bias
Voltage (V)		 HTML PDF
NC501SM-12 200 kHz 500 MHz 31 dB Min 12 HTMLPDF
NC501SM-15 200 kHz 500 MHz 31 dB Min 15 HTMLPDF
NC501SM-28 200 kHz 500 MHz 31 dB Min 28 HTMLPDF
NC502SM-12 200 kHz 1 GHz 31 dB Min 12 HTMLPDF
NC502SM-15 200 kHz 1 GHz 31 dB Min 15 HTMLPDF
NC502SM-28 200 kHz 1 GHz 31 dB Min 28 HTMLPDF
NC503SM-12 200 kHz 2 GHz 31 dB Min 12 HTMLPDF
NC503SM-15 200 kHz 2 GHz 31 dB Min 15 HTMLPDF
NC503SM-28 200 kHz 2 GHz 31 dB Min 28 HTMLPDF
NC504SM-12 200 kHz 3.5 GHz 31 dB Min 12 HTMLPDF
NC504SM-15 200 kHz 3.5 GHz 31 dB Min 15 HTMLPDF
NC504SM-28 200 kHz 3.5 GHz 31 dB Min 28 HTMLPDF
NFP1003 100 MHz 3 GHz 43 - 48 dB (100 MHz - 1 GHz) 12 to 28 HTMLPDF
SMN3018-D1D 200 MHz 6000 MHz 26 dB Min 15 HTMLPDF
SMN3018-E1D 200 MHz 6000 MHz 26 dB Min 15 HTMLPDF
SMN3110-A2A 100 kHz 3000 MHz 26 dB Min (100 KHz - 10 MHz) 2.8 to 5.5 HTMLPDF
SMN7103H-D1C 100 Hz 500 kHz 2 .0 12 +/- 5% HTMLPDF
SMN7104-D1C HTMLPDF
SMN7105-D1C 100 kHz 3 MHz 101 dB Min 12 HTMLPDF
SMN7106-D1C 200 kHz 12 MHz 95 dB Min 12 HTMLPDF
SMN7108-D1C 50 kHz 100 MHz 85 dB Min 12 HTMLPDF
SMN7109-D1C 5 MHz 500 MHz 70 dB Min 12 HTMLPDF
SMN7111-F1A 50 kHz 1 GHz HTMLPDF
SMN7114 100 MHz 3000 MHz 45 dB Min 8 to 18 HTMLPDF
Knowledge Base
Noise Source Applications
Noise Source Selection Guide
Tailored ENR Values
Gold Standard Calibration
Articles & White Papers
MWRF Properly Understanding Noise in Test Applications
Dithering Increases Dynamic Range in Digital Radio Systems
Noise Dithering Modules
EE Looking into Noise-Figure Measurement Uncertainty
MWJ Using Noise for RF Receiver Built-In Test
Contacts
Domestic Contacts
International Contacts
Copyright 2012 Micronetics, Inc., an ISO 9001:2008
26 Hampshire Drive, Hudson NH 03051, 1-603-883-2900 - web@micronetics.com
Sitemap | Contact | Legal Information